Today, the shift gate in the home decoration applied more widely. More and more product categories, to provide consumers with more choice, but it will vary greatly varying degrees of loss caused to consumers. To this end, we have summarized some of the industry choose to teach the skills available to everyone.

The choice of border profiles

Thickness of the border profiles to reach 1.2mm-1.5mm, such a shift gate can be done a maximum 2.8 meters, and will not shake, compare solid wall thickness, if less than 1.2mm, as some only a maximum of 0.8mm or 1.0mm can only be 2 meters or less, will be shaking too much, easy to problems.

Pulley Selection

Usually installed in the sliding door at the bottom. A pulley is probably divided into two parts, part of the bearing, the other part of outsourcing for the bearing layer.

The quality of the shift gate bearing the durability play a key role, a good move doors are imported light steel ball bearings, and bearing indicated on the manufacturer and product model, bearing the edge marked, the outside steel sleeve that should have its own a sign of the company. Worse when the wheel just pull up the loading effect and good and similar (most people do not feel them), but after the lapse of six months there is a clear distinction.

There is still a center of the pulley did not use bearings, but by smearing oil, by mechanical friction to achieve the sliding effect, it will not only exposed to dirt, grease, once dry, there will be blocked and can not slip phenomenon.

Brand Selection

Now many dealers have the name of such and such a shift gate can sell certain technology, the slogan of the country, so that consumers dizzying. Here special emphasis on, do not believe in the so-called recommended products, depends on whether the authority of the issuing authority, as far as possible to the businessmen ask for test report, the report should be printed on CMA national certification logo.

Finally, to remind consumers that the good shift gate pull-up smooth, no noise, no impurities, steady but light slip, there are bad noise, a kind of dynamic jump, you can look at Dora a few doors, another look at look, the shop is neat, clean, service is warm and professional. Not even a clean store can not be moved for you to make high-quality doors.